#!/usr/bin/perl
# binary search maximum stack depth for arrays and hashes
# and report it to stdout as code to set the limits

use Config;
use Cwd;
use File::Spec;
use strict;

my $ptrsize = $Config{ptrsize};
my ($bad1, $bad2) = (65001, 25000);
sub QUIET () {
    (defined $ENV{MAKEFLAGS} and $ENV{MAKEFLAGS} =~ /\b(s|silent|quiet)\b/
     and !defined($ENV{TRAVIS})) || @ARGV && $ARGV[0] eq "-q"
      ? 1 : 0
}
sub PARALLEL () {
    if (defined $ENV{MAKEFLAGS}
        and $ENV{MAKEFLAGS} =~ /\bj\s*(\d+)\b/
        and $1 > 1) {
        return 1;
    } else {
        return 0;
    }
}
sub is_miniperl {
    return !defined &DynaLoader::boot_DynaLoader;
}

if (is_miniperl()) {
    die "Should not run using miniperl\n";
}
my $prefix = "";
if ($^O eq "MSWin32") {
    # prevent Windows popping up a dialog each time we overflow
    # the stack
    require Win32API::File;
    Win32API::File->import(qw(SetErrorMode SEM_NOGPFAULTERRORBOX SEM_FAILCRITICALERRORS));
    SetErrorMode(SEM_NOGPFAULTERRORBOX() | SEM_FAILCRITICALERRORS());
}
# the ; here is to ensure system() passes this to the shell
elsif (system("ulimit -c 0 ;") == 0) {
    # try to prevent core dumps
    $prefix = "ulimit -c 0 ; ";
}
my $PERL = $^X;
if ($^O eq "MSWin32") {
    require Win32;
    my ($str, $major, $minor) = Win32::GetOSVersion();
    if ($major < 6 || $major == 6 && $minor < 1) {
	print "# Using defaults for older Win32\n";
	write_limits(500, 256);
	exit;
    }
}
my ($n, $good, $bad, $found) =
    (65000, 100, $bad1, undef);
print "# probe for max. stack sizes...\n" unless QUIET;
# -I. since we're run before pm_to_blib (which is going to copy the
# file we create) and need to load our Storable.pm, not the already
# installed Storable.pm
my $mblib = '';
if (-d 'blib') {
    $mblib = '-Mblib -I.';
}
elsif (-f "Configure") {
    $mblib = '-Ilib';
}

sub cmd {
    my ($i, $try, $limit_name) = @_;
    die unless $i;
    my $code = "my \$t; \$Storable::$limit_name = -1; $try for 1..$i;dclone(\$t); print qq/ok\n/";
    my $q = ($^O eq 'MSWin32') ? '"' : "'";

    "$prefix $PERL $mblib -MStorable=dclone -e$q$code$q"
}
# try more
sub good {
    my $i = shift; # this passed
    my $j = $i + abs(int(($bad - $i) / 2));
    print "# Storable: determining recursion limit: $i passed, try more $j ...\n" unless QUIET;
    $good = $i;
    if ($j <= $i) {
        $found++;
    }
    return $j;
}
# try less
sub bad {
    my $i = shift; # this failed
    my $j = $i - abs(int(($i - $good) / 2));
    print "# Storable: determining recursion limit: $i too big, try less $j ...\n" unless QUIET;
    $bad = $i;
    if ($j >= $i) {
        $j = $good;
        $found++;
    }
    return $j;
}

sub array_cmd {
    my $depth = shift;
    return cmd($depth, '$t=[$t]', 'recursion_limit');
}

# first check we can successfully run with a minimum level
my $cmd = array_cmd(1);
unless ((my $output = `$cmd`) =~ /\bok\b/) {
    die "Cannot run probe: '$output', aborting...\n";
}

unless ($ENV{STORABLE_NOISY}) {
    # suppress Segmentation fault messages
    open STDERR, ">", File::Spec->devnull;
}

while (!$found) {
    my $cmd = array_cmd($n);
    #print "$cmd\n" unless $QUIET;
    if (`$cmd` =~ /\bok\b/) {
        $n = good($n);
    } else {
        $n = bad($n);
    }
}
print "# MAX_DEPTH = $n\n" unless QUIET;
my $max_depth = $n;

($n, $good, $bad, $found) =
  (int($n/2), 50, $n, undef);
# pack j only since 5.8
my $max = ($] > 5.007 and length(pack "j", 0) < 8)
  ? ($^O eq 'MSWin32' ? 3000 : 8000)
  : $max_depth;
$n = $max if $n > $max;
$bad = $max if $bad > $max;
while (!$found) {
    my $cmd = cmd($n, '$t={1=>$t}', 'recursion_limit_hash');
    #print "$cmd\n" unless $QUIET;
    if (`$cmd` =~ /\bok\b/) {
        $n = good($n);
    } else {
        $n = bad($n);
    }
}
if ($max_depth == $bad1-1
    and $n == $bad2-1)
{
    # more likely the shell. travis docker ubuntu, mingw e.g.
    print "# Apparently your system(SHELLSTRING) cannot catch stack overflows\n"
      unless QUIET;
    $max_depth = 512;
    $n = 256;
    print "MAX_DEPTH = $max_depth\n" unless QUIET;
}
print "# MAX_DEPTH_HASH = $n\n" unless QUIET;
my $max_depth_hash = $n;

# Previously this calculation was done in the macro, calculate it here
# instead so a user setting of either variable more closely matches
# the limits the use sees.

# be fairly aggressive in trimming this, smoke testing showed
# several apparently random failures here, eg. working in one
# configuration, but not in a very similar configuration.
$max_depth = int(0.6 * $max_depth);
$max_depth_hash = int(0.6 * $max_depth_hash);

my $stack_reserve = $^O eq "MSWin32" ? 32 : 16;
if ($] ge "5.016" && !($^O eq "cygwin" && $ptrsize == 8)) {
    $max_depth -= $stack_reserve;
    $max_depth_hash -= $stack_reserve;
}
else {
    # within the exception we need another stack depth to recursively
    # cleanup the hash
    $max_depth = ($max_depth >> 1) - $stack_reserve;
    $max_depth_hash = ($max_depth_hash >> 1) - $stack_reserve * 2;
}

write_limits($max_depth, $max_depth_hash);

sub write_limits {
    my ($max_depth, $max_depth_hash) = @_;
    print <<EOS;
# bisected by stacksize
\$Storable::recursion_limit = $max_depth
  unless defined \$Storable::recursion_limit;
\$Storable::recursion_limit_hash = $max_depth_hash
  unless defined \$Storable::recursion_limit_hash;
EOS
}